INDUSTRIAL BURNER TIPS

BLAST TIPS

ATMOSPHERIC TIPS

FOUNDRY BURNER TIPS - SHORT BLAST TIPS

The following burner tips are generally used in a cluster on a manifold and although common in foundry applications, the tips can be used in a variety of situations where short, intense flame burners are desired. All are premix type tips or can be used with an inspirator utilising high pressure gas only. The mixing arrangement must be properly sized to provide correct operation, the capacities stated at approx. 500Pa mixture pressure. These tips give a short, intense flame due to the multiport design. There are two flame types; the conical type produces a large centre flame with surrounding smaller flames and the multiport type exhibiting flame points that are all of a similar height. They can be used on core making machines or manifolded on a pipe to produce a high capacity flame for any situation requiring high heat inputs into a small area.
The CB03 is manufactured as a two piece design and is particularly suited to the Woodway core machines. The CB10 burner tip is especially suitable for the Macbro core machine. The MP10 is our most popular multiport tip delivering a high heat output with high turn down and is similar to the GRID10. The MP10 are most commonly used to preheat dies fitted into a manifold with a CSA 10% bigger than the total burner port area.

PART NUMBER

SIZE (BSPM)

TOTAL PORT AREA mm2/in2

CAPACITY MJ/HOUR

DIMENSIONS (mm)
Length    Diameter

FLAME TYPE

CB03

6mm

9/.015

3-5

33 14(hex)

CONICAL

CB08

8mm

7/.012

3-5

27 14(hex)

CONICAL

CB10

10mm

7/.012

3-7

18 19(hex)

CONICAL

MP10

10mm

30/.047

12-25

35 25

MULTIPORT

K8

8mm

20.9/.032

5-10

25 20

MULTIPORT

K10

10mm

20.9/.032

5-10

25 20

MULTIPORT

K15

15mm

30.3/.047

8-15

34 25

MULTIPORT

 

foundry.jpg (15169 bytes)

MOUNTING BURNER TIPS

These tips are commonly mounted onto pipe manifolds. It is important to make certain the pipe will allow the correct capacity, the following table illustrates the amount of total mixture (air and gas) that can be passed at a mixture pressure of approx. 125 Pa. Thick wall black pipe is usually employed.

PIPE SIZE BSP

25mm

32mm

40mm

50mm

65mm

80mm

Flow (m3/ft3/hr)

23/800

43/1500

63/2200

100/3500

160/5500

230/8000