REPLACING THE SAFETY PROBE

Usually if a problem occurs keeping the flame alight while depressing the flame safety button, it probably indicates a fault in either the flame safety valve or the probe. There are several types of probes and various means of holding them securely to the main burner tip or the pilot. It is important to remember these main points:

SAFETY PROBE FITTED TO SMALL PILOT

Check pilot flame is heating tip correctly and probe is located in slots.

 

SAFETY PROBE FITTED DIRECT TO MAIN BURNER

SAFETY PROBE FITTED TO LARGE PILOT

probejm.jpg (17463 bytes)

Click here to return to Ceramic Firing Burners.

Copyright Australian Combustion Services Pty Ltd 1997-2004