BP Burner

The BP range of burner units are pre-mix type burners that are used with any clean fuel gas and low pressure forced air. The basic unit has a flame retaining tip, aspirator mixer unit and air and gas control valves. The capacities given below are obtainable from an air pressure of approx. 2-4 kPa, greater capacities are possible at higher air pressures. BP burner kits are provided sized for an average output. Sizing charts are available however Australian Combustion Services Pty Ltd can size the mixer to suit your application providing we know the air pressure, maximum capacity required and the gas type.

There are various options available that make operation easier and safer. Most BP premix burner installations include a zero type gas governor for simple air valve only gas rate adjustment. Australian Combustion Services Pty Ltd can advise on flame safety to current gas code requirements.

MODEL NUMBER	SIZE (BSP)	FLAME LENGTH (mm)	OVER ALL LENGTH (mm)	CAPACITY MJ/HOUR @ MIXTURE PRESSURE .75 kPa 1.5 kPa		WEIGHT KG
TH - BP1	15mm	150	300	20	35	2.0
TH - BP2	20mm	220	330	45	60	3.0
TH - BP3	25mm	300	370	70	100	5.5
TH - BP4	32mm	380	380	150	220	5.6
TH - BP5	40mm	450	500	240	350	9.2
TH - BP6	50mm	550	650	420	600	11.0
TH - BP7	65mm	620	700	600	820	12.0
TH - BP8	80mm	800	950	780	1000	20.0
TH - BP9	100mm	1000	1100	1250	1800	25.0